Product_Shanghai yuanna finechemicalco.,ltd

Product Center

Product	Properties
One dosage scouring-bleaching agent- AP	Multi-functional pre-treatment of scouring-bleaching without alkali and peroxide. many purposes in ona single product, suitable for cotton, hemp,PE,rayon, tencell, moadl, bamboo fiber with excellent scouring, bleaching, desizing, stains removing(mould), detergency.
Low temperature high efficiency -- AP-L	The scouring-bleaching at temperature of 80 ℃ with AP-L can relatively reduce cost to a large extent, shorten heating and cooling time, get excellent whiteness and high capillary effect, suitable for cotton, hemp and blend.
Fast and efficient scouring--EFT	The advanced activator in EFT is more than double performance than normal scouring, low alkali bleaching , neutral resuidal fluid in pre-treatment, easy to washing, reduce neutralization washing process, shorten time of scouring-bleaching.
Alkali substitute for reactive dyeing-- alkali substitute YNH	The dosage is just 1/8-1/10 instead of traditional process with excellent buffer to prevent stable PH in fixing and get the same shade and colour fastness with traditional process. Reduce process of washing and neutralization,shorten process time, decrease alkali cost at above 50%
Optimizer for reactive dyeing -- BASS	The multi-functional levelling is suitable for retarding, solubilizing and others in reactive and direct dyeing.With the function of dyeing optimization and improvement of dyeing stability, especially for colour with more difficult in dyeing, such as cobalt blue and turquoise. Excellent levelling to improve the rate of dyeing success at first attempt.
Fast soaping with water saving -- NEW	Reduce 2-3 times washing than traditional soaping. As NEW act the part powerful soaping and decoloring, the residual fluid will be clear without many times washing. Therefore, reduce time of washing, water, and energy. Excellent washing,blister, dry and wet abrasion fastness
Saline and alkali resistance soaping with low temperature -- anti-staining soaping LOW	Enable to decrease washing times as soaping effect dose not get any influence from saline, alkali and hardness of water. The excellent soaping is also in little liquor ratio and low temperature of 80 ℃. Brilliant anti-staining at white bottom for reactive printing fabric.
Polyester washing without fluid disposal -- Acid reductive cleaner 318	No fluid disposal after polyester dyeing. Reductive cleaner in acid condition to cut down neutralization, washing. Shorten 3 times washing. Sodium hydrosulfite and caustic alkali substitute will decrease strength injury. With excellent reductive cleaning, effectively improve color fastness and vividness of dyed fabric.
Scouring and dyeing in a single step without scouring -- TCB	Suitable for TC and CVC blend fabric. Cooperate with polyester dyeing in one batch without pre-treatment. Shorten process time with excellent scouring, bleaching and cotton seed shell removing. Able to get the same dyeing effect with traditional process.
TC reductive clean soaping -- DMW	Cut down reductive cleaning after TC、 CVC blend fabric dyeing. Excellent extraction, dispersing, soaping for dispersed dye. No reductive oxidation and influence on shade, can used for TC fastness repairing as well, get excellent washing, blister fastness.
Polyester sublimation fastness improve -- polyester fixing TF	Suitable for polyester blend fabric. The dispersing dye with poor sublimation fastness is easy to result in decreased fastness due to migration during high temperature setting. TC is effective in improving sublimation, blister and washing fastness.
Stable PH value in fabric -- inhibitors PH -65	Excellent PH buffer to ensure the stable PH value at 6.5-7 in fabric. Brilliant neutralization in both acid and alkali fabric. No color change in sensitive color(coffee, rose red, turquoise, etc) and bleached fabric.
Efficient desizing scouring agent -- CP-LSP	The function of emulsifying, dispersing, bleaching and stability. The directed imperfection and size can be brought by special emulsifying and dispersing. Fantastic decontamination in neutral and low temperature. The imperfection and size can be dispersed evenly due to special laminar structure without staining, which can get accurate and efficient desizing and scouring.
Sodium silicate substitute alkali agent in cold dyeing	CPD is the latest fixing alkali agent, suitable for cold padding dyeing of reactive dye, able to effectively instead of traditional sodium silicate. The traditional alkali system with silicon has defect like rough handle, equipment injury and “white spot” caused by machine dyeing rejection as silica scale. CPD has similar fixing rate with traditional silicon fixing, but lower hydrolyzing rate than traditional non-silicon fixing agent.
Polyester in one dosage oil remover -- T	At present, environmental protection is strict to peroxide and sodium hyposulfite, purchase and storage are both complex. The product is easy to deal with these trouble. It is suitable for polyester, nylon and blend fabric. Only one product is used in pre-treatment,which simplify operation, easy to remove various stains ( mould, rust, oil stain, etc)
Polyester detergency without fluid disposal -- Detergency TA	Suitable for washing after dispersed dyeing, sodium hyposulfite and alkali substitute, no fluid disposal during cooling after dispersing dyeing, get excellent color fastness. Largely reduce reductive cleaning at above 1 hour and save 3 vats of water.

Product	Characteristic
OBA 4BK Anionic	Suitable for cotton, hemp, tencell and blend in whitening and brightening. Slightly blue light, less dosage, strong fluorescence, whiteness increased, weak acid, alkali, perborate, hydrogen peroxide resistance. Can be used in single step scouring-brightening. Dosage: Exhaust:0.05-0.4%(o.w.f)
OBA HXT Anionic	Excellent whiteness for cotton, hemp and tencell alike in whitening and brightening.less dosage, strong fluorescence, whiteness increased, weak acid, alkali, perborate, hydrogen peroxide resistance. Can be used in single step scouring-brightening. Dosage:Exhaust:0.05-0.4%(o.w.f)
OBA BHT180 Anionic	Suitable for cotton, hemp, tencell and blend in whitening and brightening. high affinity from natural light to blue fluorescent , high absorbency, Withstand hydrogen peroxide , Alkali, electrolyte , can be used in one bath oxygen bleaching and brightening process. Dosage: Exhaust:0.05-0.4% (o.w.f)
OBA VBL Anionic	Suitable for cotton, hemp, tencell and blend in whitening and brightening. Slightly blue light, less dosage, strong fluorescence, whiteness increased, weak acid, alkali , perborate, hydrogen peroxide resistance. Can be used in a single step scouring-brightening. Dosage: Exhaust:0.05-0.4% (o.w.f)
OBA MST Anionic	Suitable for cotton,hemp,tencell,and blend in normal temperature padding and brightening and whitening.less dosage, strong fluorescence ,whiteness increased, electrolyte resistance.Stable PH at 2-11,can be used with resin in single step and in one bath oxygen bleaching and brightening. Dosage:Padding: 5.0-30g/L
OBA NFW450% Anionic	Suitable for nylon and its cotton blended fabric, high strength, bright Whiteness with violet light fluorescent . High acid and alkali stability, hydrogen peroxide and reductant are stable, good wash resistance after whitening. Dosage: Exhaust:0.1-0.4% (o.w.f)
OBA BL-1 Anionic	Suitable for T/ C, Tencell, PE, T/ H in brightening and whitening with ultra-violet fluorescent. Acid, alkali, hydrogen peroxide resistance. Dosage: Exhaust:0.2-0.4% (o.w.f)
OBA BL-2 Anionic	Suitable for T/ C, Tencell, PE, T/ H in brightening and whitening with ultra-violet fluorescent. Acid, alkali, hydrogen peroxide resistance. Dosage: Exhaust:0.2-0.4% (o.w.f); Padding:2.0-4.0g/L
OBA BAC Anionic	Suitable for acrylic fiber and its blend in one-bath dyeing of acrylic fiber and its blended fabrics and yarns with excellent anti-bleaching performance, good whitening effect and extra white effect. Dosage: Exhaust:0.3-1.0 (o.w.f)

Product	Characteristic
Reactive Printing Thickening CPR Anionic	As thickener in reactive dyestuff printing on cotton,viscose .High paste forming rate,thickening quickly,easy to wash off .Good electrolyte resistance and water holding performance. High and bright color yield. Can be used alone or together with sodium alginate. Dosage:Exhaust:3.0-6.0%&1.5-2.0% 3.0-6.0% or used with sodium alginate at 1.5-2.0%
Disperse Thickening TPR Anionic	Suitable for disperse printing of all kinds of polyester. High paste forming rate ,thickening quickly. Clear outline after printing.Good electrolyte resistance and water holding performance. Paste made from it can struck-through screen more easily.High and bright color yield. Dosage:Exhaust：3.0-6.0%&1.5-2.0% 3.0-6.0% or used with sodium alginate at 1.5-2.0%
Pigment Thickening PPR Anionic	As thickener in pigment printing system and other aqueous system.Good water holding property,thickening quickly.Paste made from it can struck-through screen more easily.Clear outline after printing. Dosage:Exhaust:2.0-3.0%
Transprint PA Anionic	Suitable for flat screen and rotary screen pigment.Can also be used as binder for non-woven fabric.Good compatibility with other chemicals.High and brilliant color yield,good handle, excellent rubbing and brushing fastness. Dosage:5.0-25%
Transprint PAC Anionic	Suitable for the high demand pigment printing to get a reactive print style. Good compatibility,bright color and full color yield, can avoid blocking the printing screen. Soft handle, excellent rubbing and brushing fastness. Dosage:5.0-25%
Transprint APF Anionic	High quality reactive binder with brilliant handle and high wet fastness.Suitable for the high demand pigment printing to get a reactive print style. Good compatibility,bright color and full color yield, can avoid blocking the printing screen. Soft handle, excellent rubbing and brushing fastness.
Printing Thickeners PG-R Anionic	As thickener in reactive dyestuff printing on cotton, rayon.Can be used alone,compared with sodium alginate, high and bright color yield. Clear outline after printing. Suitable for dot, fine line patern print. Suitable for reactive and disperse print to synthetic fiber by reactive dye3-6%
Printing Thickeners PG-D Anionic	Natural thickener in disperse dyestuff printing on polyester and burn-out for cotton. Can be used together with other thickener.Good paste stability, fluid performance, brilliance and penetrating property. Dosage:3-6%
Printing Thickeners PG-A Anionic	Natural thickener, suitable for acid printing of silk and nylon fabrics with good rheological properties. Clear outline after printing, high color yield, easy to wash off , brilliant handle. Dosage:3-6%
Dye Salt	Reductive agent in printing and dyeing agent with good solubility.
Urea substitute	Urea Substitute to reduce ammonia pollution.

Product	Characteristic
Moisture Control 716 Anionic liq	For PE and blend alike to impart quick drying with excellent static resistance, quick decontamination , good softness and washability . Can prevent creases during a single step with dyeing. Dosage: Exhaust:1.0-4.0%; Padding:10-40g/L
Anti-Piling 718 Anionic liq	To prevent pilling and increase abrasion fastness. Dosage:20-40g/L
Anti-Static 722 Anionic liq	To prevent static during process with good hygroscopicity , conductivity , and anti-fouling and dust proofing. Dosage: pPadding:10-30g/L
Wind Proof WD Weak-Cationic liq	For use with cotton, T/C with density requirement like bed quilt to prevent down softening. Dosage:Padding:50-100g/L
Yellowing resist XP Non-Ionic Powder	Suitable for heat setting of various fabrics especially for polyamide and its blend ,pale color and white fabrics of nylon spandex to reduce yellowing of polyamide fiber during presetting and film pressing. Dosage:10-30g/L
Yellowing resist HP Anionic liq	Suitable for various fabric especially for nylon storage and prevent yellowing to occur. Dosage: Exhaust:1.0-3.0%(o.w.f); Padding:10-30g/L
Stiffener ST Anionic liq	Suitable for various fabric to enhance stiffness of fabrics and improve elasticity with strong sense of thickness, lasting effect and no softening. Dosage:Adjust per requirement10-20g/L; Stiffening:20-100g/L
Fire Retardant CP Non-Ionic Powder	Suitable for cotton, PE, wool and alike to impart non-durable fire retardant. Good effect does not affect the color and handle of the fabrics. Dosage:Padding:100-200g/L; Spray:150-300g/L
UV finishing Anionic liq	To impart UV resist for PE and alike at wavelength of 280-400nm and color fastness to light. Dosage:Exhaust:2.0-4.0% ; Padding:20-40g/L
Anti-Bacteria 400 Anionic liq	To impart anti bacteria and mite properties. Particularly suitable for close-fitting fabrics as well as bedding resistant to multiple washing. Dosage: Exhaust:3.0-6.0% ; Padding:30-60g/L
Water and oil resist C8 Weak Cationic liq	Suitable for all fabrics to impart water resist and good handle. Dosage: Padding:10-50g/L
Water and oil resist C6 Weak Cationic liq	Suitable for all fabrics to impart water resist and good handle Dosage: Padding:10-50g/L
Water and oil resist NF Weak Cationic liq	Suitable for all fabrics to impart water resist and good handle Dosage: Exhaust:30-60g/L
All-purpose resist SR Weak Cationic liq	Suitable for natural and regenerated fiber to impart water resist, oil resist and stain resist. Dosage: Padding:30-60g/L
Anti-Crease RES	For Cotton and cellulose to prevent shrinkage and creasing without heat. Formaldehyde container in fabric is less than 75ppm.Used with most softener,stiffener and brightening agent in a single step. Dosage: Exhaust:40-80g/L
Anti-Crease RES-N	For Cotton and cellulose to prevent shrinkage and creasing without heat.APEO Free.Used with most softener,stiffener and brightening agent in a single step. Dosage: Exhaust:60-120g/L
Anti-Crease RES-C	Synergize with non iron resin, cut down temperature, accelerate the reaction between resin and fiber,reduce process time. Dosage: 28-30% Usage is 28-30% of resin
Protection anti- crease RES-P	Synergize with non iron resin, improve abrasion resist, compensate for the damage caused by the resin cross-linking. Dosage: Padding:20-40g/L
Anti-Crease RES-H	Improve strength to fabrics and reduce the strength damage.Impart good elasticity and handle. Dosage:Padding:10-30g/L

Product	Characteristic
Softener CS Weak-Cationic Flake PH:4-5	Flake softener for use with all material to make soft handle with plump,weak ionic and smaller yellowness. Temperature :60-70℃ Proportion1:10-1：20 Dosage:@10% dilution Exhaust:2.0-8.0%; Padding :20-50g/L
Fluff Softener FC Cationic Flake PH:4	For imparting fluff to all material.Excellent flufft to improve pilling and finishing. Temperature :60-70℃ Proportion1:10-1：20 Dosage:@10% dilution Exhaust:2.0-8.0%;
Softener Flake ES Cationic Flake PH:4-5	Flake softener for use with cotton,hemp,acrylic alike to get soft handle and meet the requirement. Temperature :60-70℃ Proportion1:10-1：20 Dosage:@10% dilution Exhaust:2.0-8.0%; Padding:20-50g/L
Softener NS Non-Ionic Flake PH:4-5	Suitable for cotton,hemp alike in soft finishing .Non yellowing and compatible with other auxiliaries. Temperature :60-70℃ Proportion1:10-1：20 Dosage: @10% dilution Exhaust:3.0-8.0%; Padding:30-80g/L
Softener PS Cationic Paste PH:4-5	Suitable for cotton,towel and its blend in soft finishing with excellent hydrophilicity and anti-static to make soft and smooth handle.Without return for repairs Temperature 30-40℃ Proportion1:10-1：20 Dosage:@5% dilution Exhaust:2.0-6.0%; Padding:20-100g/L
Softener AS Anionic Paste PH:4-5	Temperature :60-70℃ Proportion1:8-1：10 For cotton and its blend with excellent hydrophilicity and non-yellowing.Can compatible with brightening agent in a single step. Dosage: @10% dilution Exhaust:2.0-6.0% Padding:30-100g/L
Yarn Wax W Non-Ionic liq PH:4-5	For cellulose waxing with good hydrophilicity to impart even low friction value and high surface smoothness,which will significantly improve weave efficiency. Dosage: Exhaust:2.0-4.0%(o.w.f)
Wax PE Weak-Cationic liq PH:4-5	For all fiber waxing with good affinity to impart even low friction value and high surface smoothness,which will significantly improve weave efficiency and soft handle. Dosage: Exhaust:2.0-4.0%(o.w.f)
Wax TW Non-Ionic liq PH:4-5	Suitable for PE short fiber sewing thread and embroidery thread with high melting point,smoothness,and softness to impart excellent trace properties. Dosage: Exhaust:2.0-4.0(o.w.f)
Softener 708 Cationic/Anionic liq PH:4-5	For PE, Cotton and its blend to increase fluff with excellent affinity,dense and even pilling effect in polar fleece processing. Dosage: Exhaust:2.0-5.0% (o.w.f); Padding:20-50g/L
Fluff FE Non-Ionic liq PH:4-5	For Cotton to increase full with good hydrophilicity,compatibility,and soft handle. low yellowing. Dosage: Exhaust:1.0-3.0%(o.w.f); Padding:10-30g/L
Silicon CD-A Cationic liq PH:4-5	Suitable for PE, cotton and blend for dark color to increase contrast and brightness, especially for Arab black fabrics,which will increase the hyperchromic effect to 50%. Can be used in conjunction with CD-B and impart soft, smoothness. Dosage:Padding:10-40g/L
Silicone CD-B Cationic liq PH:4-5	For use with PE, cotton to increase depth of color and brightness, especially for Arab black fabrics,which will increase the hyperchromic effect to 50%.And impart soft, smoothness Dosage:Padding:10-40g/L
Silicone CGF Non-Ionic liq PH:4-5	For hydrophilic softness and fluff handfeel。High concentration and stability,which will not break emulsification or bleach oil. Dosage: @1:6 solution Exhaust:2.0-5.0%(o.w.f); Padding:20-50g/L
Softener NT-40 Weak-Cationic liq PH:4-5	To impart soft and smoothness for use with cotton and viscose alike. Excellent hydrophilicity. Dosage: Exhaust:1.0-4.0%(o.w.f); Padding:10-40g/L
Softener NT-566 Weak-Cationic liq PH:4-5	To improve fluff and smoothness handfeel. Suitable for all fabrics in polyether modification to improve high concentration silicone oil emulsion. Dosage: Exhaust:1.0-4.0%(o.w.f); Padding:10-40g/L
Softener NT-815 Weak-Cationic liq PH:4-5	Cool hand feel,impart soft and draping sensation after finishing,good moisture absorption. Dosage: Exhaust:1.0-4.0(o.w.f); Padding:10-40g/L
Softener NT-616 Non-Ionic liq PH:4-5	A self-emulsifying non-ionic Hydrophilic block silicone oil with a novel modified organosilicon chemical structure. An ideal product with time-saving and high efficiency for silicone finishing of overflow machine. Dosage: Exhaust:1.0-4.0%(o.w.f)

Product	Application	Characteristic
PH buffer AC Non-ionic Liq PH:2-3	Suitable for cotton in neutral process	Use for cotton and its blend, after dyeing acting as a pH buffer and can be use with soaping agent. Free from sulfates, with good wetting function. Dosage:PH buffer:1.0-3.0g/L
Acid Substitute FDA Non-Ionic Liq PH:2-3	Suitable for PE,nylon,acrylic fiber alike in dyeing	Able to substitute Acetic acid and widely usage in dyeing and neutral. Dosage: Dyeing:0.3-0.5g/L; PH buffer:1.0-2.0g/L
PH control PH65 Anionic/non-ionic Powder PH:5-6	Use for pH control to stabilize the pH value at neutral	Use for pH control to stabilize the pH value at neutral while doubling as a buffer agent. Will not affect the pH with the increase of acidic solution. Dosage:Padding:4.0-6.0g/L
Acid Stabilizer PH45 Non-Ionic Liq PH:4-4.5	Suitable for PE alike in dyeing	Able to stabilize pH at 4.5 without volatilization and the excellent buffer ensure the stable shade. Dosage:0.5-1.0g/L
Acid Release PH35 Non-Ionic Liq PH:6-7	Suitable for PE,nylon,acrylic fiber alike in dyeing	PH modifier to 3.5 with excellent buffer during dyeing process. Dosage:0.5-2.0g/L
De-Foamer FM Non-Ionic Liq PH:6-7	Suitable for dyeing process and water treatment to remove or restrict foaming	For non-silicone de foaming issue can be used in water treatment. Dosage:1.0-2.0g/L
Silicone De-Foamer FD Non-ionic Liq PH:6-7	Suitable for dyeing process and water treatment to remove or restrict foaming	For use in textile, printing, paper mill and water treatment to remove foaming in a 100-140℃ temperature. Dosage:1.0-2.0g/L
Anti-Crease 214 Anionic Liq PH:6-7	Suitable for rope process	For use in rope process prevent crease to increase lubricant. Dosage:1.0-2.0g/L
Anti-Crease SL Anionic Liquid PH:6-7	Suitable for rope process	Especially suitable for PE and blend, stable in high temperature and prevent crease Dosage:1.0-2.0g/L
Repair Agent AD Non-Ionic Liq PH:6-7	Suitable for all defect to repair	Use when repair on re-dyeing process, without the need of stripping agent Dosage:1.0-3.0g/L
Stripping Agent CP Non-Ionic Powder PH:6-7	Suitable for all dye defect to strip	To strip unwanted stain and dye and fluorescent auxiliaries Dosage: 1.0-4.0g/L
Stripping Agent WF Anionic Liq PH:6-7	Suitable for stripping cationic fixing agent	Specialize in stripping cationic fixing agent thoroughly. Dosage:1.0-5.0g/L
Wax Remover WR Non-Ionic Liq PH:6-7	Suitable for residual wax in dissolution fiber.	To remove residual wax in fiber, applicable during stentering ,which can remove the wax thoroughly and improve capillary effect. Dosage: Exhaust:5.0-10g/L
Weighting Agent WT Non-Ionic Liq PH:6-7	Suitable for all fabrics to increase bulk and weight.	For use to increase bulk and weight by approx 3-15% does not affect hand feel. Dosage: Exhaust:50-150g/L

Product	Application	Characteristic
Fixing agent 1209 Cationic liq PH:5-7	Suitable for fixing of reactive ,direct dyes after dyeing or printing	For bright red, black and dark color alike, high conc. Excellent fixing to improve wet color fastness such as washing color fastness and perspiration color fastness. Dosage:Exhaust:0.3-1.0%（o.w.f）； Padding:5.0-15g/L
Fixing Agent 218A Cationic liq PH:5-7	Suitable for fixing of reactive ,direct dyes after dyeing or printing	Formulate for turquoise blue and alike with excellent fixing properties.Able to improve wet color fastness such as washing color fastness and perspiration color fastness. Dosage:Exhaust:1.0-3.0%（o.w.f）； Padding:5.0-30g/L
Fixing agent EC-F Cationic liq PH:5-7	Suitable for fixing of reactive ,direct dyes after dyeing or printing	High concentrated and wide adaptability. Formulate for turquoise blue and alike with excellent fixing properties.Excellent fixing to improve wet color fastness such as washing color fastness and perspiration color fastness. Exhaust:1.0-3.0%（o.w.f）； Padding:5.0-30g/L
Fastness improver 601 Cationic liq PH:5-7	Suitable for reactive ,direct dyes to enhance abrasion fastness after dyeing or printing	Increase the abrasion fastness of dark colored fabrics by 1-2 degree Dosage:Exhaust:2.0-4.0%（o.w.f）； Padding:10-40g/L
Fixing Agent TF Non-Ionic liq PH:5-7	Suitable for PE and its blend improve water and sublimation color fastness	For use with PE, T/C, Polyamide and its blend to improve color sublimation fastness. Dosage: Exhaust:1.0-3.0g/L ; Padding:10-30g/L
Acidic Fixing 518 Anionic liq PH:2-4	Suitable for fixing of acid and neutral dye in dyeing and printing	For use with acid, neutral and mental complexing dye during fixing after dyeing and printing to improve washing ,water , perspiration and seawater color fastness. Dosage:3.0-6.0% (o.w.f)
Acidic Fixing CLH Anionic liq PH:1-3	Suitable for fixing after flouresce after dyeing and printing	For use with nylon dyeing or print fixing to enhance fastness,like washing ,seawater,perspiration and saliva fastness without influence on flouresence brightness. Dosage:3.0-6.0% (o.w.f)

Product	Application	Characteristic
Low-temp soaping LOW Anionic liq PH:6-8	Suitable for reactive,direct dyeing and printing and soaping	Low temperature functioning at 60-80℃ with good dispersing and alkali stability properties. Dosage:Exhaust:0.5-2.0g/L； Padding:1.0-3.0g/L
Soaping Agent 1206 Anionic liq PH:6-8	Suitable for reactive,direct dyeing and printing and soaping	Excellent dispersing and non-sticking, also able to increase fastness with sequestering and no foam properties. Dosage:Exhaust:1.0-3.0g/L； Padding:0.5-2.0g/L
Anti-stain soaping SR non-ionic liq PH:6-8	Suitable for reactive,direct dyeing and printing and soaping	For use in organic cellulose and yarn dyeing or printing soap wash, with sequestering function and no foam properties. Dosage:Exhaust:0.5-2.0g/L； Padding:1.0-3.0g/L
2-in-1 soaping AW Anionic liq PH:2-3	Suitable for reactive,direct dyeing and printing and soaping	Able to function as soap and pH buffer in one step bath, with sequestering and no foaming. Dosage:Exhaust:0.5-2.0g/L； Padding:1.0-3.0g/L
Soaping NEW Anionic/non-ionic liq PH:7-8	Suitable for reactive,direct dyeing and printing and soaping	High conc. Soaping powder especially formulated for deep red and black color to improve fastness. Dosage:Exhaust:0.2-0.5g/L； Padding:1.0-3.0g/L
Soaping DMW Anionic liq PH:6-7	Suitable for T/C or alike to leave out reduction washing	Useful for T/C or alike increase fastness and skipping recovery wash.Excellent dispersed soaping and repairing. Dosage:Exhaust:2.0-3.0g/l； Padding:3.0-5.0g/L
Soaping Agent SPA Non-Ionic liq PH:6-7	Suitable for PAN and its blend in dyeing,printing and soaping	Excellent sequestering and dispersing function to prevent stain and improve fastness. Dosage:1.0-2.0g/L
Acidic Reductive Cleaning 318 Non-Ionic Powder PH:8-10	Suitable for disperse dyes in acid recovery wash	Able to substitute sodium sulfite, and alkali salt without the need to dispose of residual waste water, reduce need for water wash and neutralization process. Dosage:1.0-3.0% (o.w.f)
Alkali Reductive Cleaning RC-100 Non-Ionic Powder PH:6-8	Suitable for disperse dyes in alkali recovery wash	Substitute for sodium sulfite without danger and irritating odor. Dosage:1.0-4.0%（o.w.f）
Reductive Cleaning TA Non-Ionic Powder PH：7-8	Suitable for disperse dyes in a single step washing without solution disposal	Able to substitute sodium sulfite, and alkali without the need to disposal of residual waste, TA washing can get excellent color fastness and reduce process time at 2 hours Dosage:1.0-3.0% (o.w.f)
Anti-Stain AR Non-Ionic liq PH:5-7	Suitable for disperse dyes in recovery wash	Excellent dispersing ability to prevent anti-stain use during alkali reductive cleaning to improve fastness. Dosage:0.5-2.0g/L
Fastness Improver TOS Cationic//non-ionic liq PH:5-7	Suitable for polyamide, PE and blend to enhance fastness	For use with polyamide, PE and blend to enhance fastness which can prevent stain spandex. Dosage: 2.0-3.0g/L

Product	Application	Characteristic
Multi-function fixing BASS Anionic liq PH:4-5	Suitable for cotton and its blend in dyeing	Used for reactive dyeing especially for turquoise blue and similar color, with pH buffer sequestering, and improve dye affixation. Dosage :Exhaust:1.0-3.0 o.w.f
Cotton Levelling 213 Anionic liq PH:6-7	Suitable for cotton and its blend in dyeing	Used in cotton levelling with sequestering and improvement of solubility dosage function. Dosage:Exhaust:1.0-3.0%(o.w.f)
Anti-migration PA Anionic liq PH:6-7	Suitable for cotton,PE alike in continuous tie dyeing.	For use with cotton PE and its blend prevent color migration with good wetting and non-stick properties. Dosage:Padding:5.0-10g/L
Levelling TCB Non-ionic liq PH:8-9	Suitable for TC alike used during bleaching cotton while dyeing PE	For use with TC alike used during bleaching cotton while dyeing PE, with excellent pH buffer, dispersing and levelling properties. Able to shorten process by 2 hours. Dosage:Exhaust:2.0-3.0%（o.w.f）
Multi-functional levelling TDS Anionic liq PH:3-4	Suitable for PE in high temperature dyeing	PH modifier, high temperature levelling with sequestering function. Dosage: 1.0-3.0g/L
Multi-functional levelling TLW Anionic liq PH：7-8	Suitable for PE in high temperature dyeing	Multi-functional levelling with high temperature levelling, dispersing,oil removing, vat cleaning and preventing low molecular polymer. Dosage:1.0-3.0g/ L
High-Temp Levelling 307 Anionic liq PH:6-8	Suitable for PE in high temperature dyeing	Use for PE at high temperature levelling with excellent sequestering,retarding,migrating. Dosage:1.0-2.0g/L
Microfiber Levelling TL Anionic liq PH:6-8	For use with extra fine yarn PE at high temperature	For use with extra fine yarn PE at high temperature with excellent high temperature sequestering,retarding,migrating. Dosage:0.5-2.0g/L
Repair agent 314 Anionic liq PH:5-7	Suitable for PE and its blend in levelling and fixing.	Excellent migration and sequestering to prevent influence color light. Dosage: Dyeing:0.2-0.8g/L ； Repair:1.0-3.0g/L
Leavening PTA Anionic liq PH:2.5-4.5	Suitable for PE in low temperature dyeing	For use with PE and its blend in low temperature dyeing improve dyeing and levelling. Dosage:1.0-3.0%（o.w.f）
Oligomer removal TAW Anionic liq PH：6-7	Suitable for PE dyeing to reduce Oligomer and vat staining	Prevent Oligomer process causing dyeing agglomerate, reduce vat staining useful for spun yarn dyeing. Dosage:0.5-2.0g/ L
Acid levelling 511 Zwitterionic liq PH:6-8	Suitable for nylon and its blend,wool in acid and neutral dyeing.	For use with acid and mental complexing dye to improve levelling and dispersing. Dosage:0.5-2.0% (o.w.f); Repair:2.0-4.0% (o.w.f)
Anti-Migration PAL Zwitterionic liq PH:6-8	Suitable for nylon and its blend,wool in acid and neutral dyeing.	For use with acid and mental complexing dye to enhance levelling,which will effectively improve filing bars and stripy defects. Dosage:0.5-2.0%(o.w.f); Repair:2.0-4.0%(o.w.f)
Levelling SET Zwitterionic liq PH:6-8	Suitable for nylon and its blend,wool in acid and neutral dyeing.	For use with wool and Nylon for levelling in acid or 1:2 mental complexing dye. Dosage:0.5-2.0%(o.w.f); Repair:2.0-4.0%(o.w.f)
Dye Prevention 512 Anionic liq PH:2-4	Suitable for nylon,cotton and its mixed fabrics in dyeing to prevent staining to nylon.	Prevent dye adherent to nylon and for use with cotton without influence on color light, handle,and fastness. Dosage:1.0-2.0g/L
Pigment DO Cationic liq PH:5-7	Suitable for nylon,PU and its blend in acid dyeing to promote the two component to dye in a single step	To get the same color as nylon by improving the dyeing property of the acid dyes, the spandex could get the same color as nylon, and the color fastness of the fabric could be improved. It has a certain levelling effect on Nylon. Dosage:0.5-2.5%（o.w.f）
Levelling LPA Cationic liq PH:5-7	Suitable for PAN and its blend in dyeing.	For use with cationic dyeing can be use for color repair. Dosage:0.5-2.0% (o.w.f); Repair:2.0-4.0(o.w.f)
Sediment Proof IP Non-Ionic liq PH:6-8	Suitable for PU and its blend in dyeing to prevent sedimentation	Especially for use in a single step with PA/ PAN or WO/ PAN fiber to prevent sedimentation. Dosage:1.0-2.0g/L

Product	Application	Characteristic
Dye-alkali YHN Nonionic Powder PH:11.5-12.5	Suitable for reactive dye in fixing	Alkali substitute can be used as fixing agent with excellent pH buffer and usage is 1/ 8 of soda ash (NaOH, soda ash).Able to get the same color light and fastness as tradition and reduce soaping,neutralizing and process time,which will reduce the alkali cost to 50%. Dosage:Exhaust:1.0-4.0(o.w.f)
Dye-alkali CPD Nonionic Powder PH:11.5-12.5	Suitable for reactive dye in cold pad dyeing to fix	Sodium silicate substitute can resist the tradition with hard handle,equipment damage and white defect by silicate.CPD has the same fixation and lower water degradation rate. Dosage:Padding:10-20g/L