Pre-treatment auxiliaries
Product Center
| Product | Application | Characteristic |
|
Desizing enzyme BT Nonionic liq PH:5-7 |
Suitable for desizing process against all size agent |
Used for desizing, stable and effective under a wide range of temperature with high concentration. Dosage:Exhaust:0.5.-2.0（o.w.f）； Padding:2.0-5.0g/L |
|
Desizing enzyme HT Nonionic liq PH:5-7 |
Suitable for desizing process against all size agent. |
Used for desizing at temperature of 80℃ and above. Can compound with anionic and non-ionic agent. Dosage:Exhaust:0.5.-2.0（o.w.f）； Padding:2.0-5.0g/L |
|
Acidic Polishing enzyme BIO Nonionic liq PH:5-7 |
Suitable for cotton,hemp,viscose alike in polishing process |
Used on hemp, cotton and viscose alike under an acidic polishing process and its effect increases significantly with time. Remove fluff improve the fabrics handle and reduce the piling. Dosage:Exhaust:0.5.-2.0%（o.w.f） |
|
Polishing enzyme 9000 Nonionic liq PH:5-7 |
Suitable for cotton,hemp,viscose alike in polishing process |
Used for cotton, hemp viscose alike reduce piling and provide better fabrics under a neutral polishing process. Dosage:Exhaust:0.5.-2.0%（o.w.f） |
|
Tencell polishing TS Nonionic liq PH:5-7 |
Suitable for regenerated cellulose fiber and its blend in polishing |
For use with Tencell during polishing and its effect increases significantly with time. Improve the fabrics handle and reduce the piling. Dosage:Exhaust:0.5.-2.0%（o.w.f） |
|
Rayon enzyme polishing RM Nonionic liq PH:5-7 |
Suitable for regenerated cellulose fiber and its blend in polishing |
For use with rayon, modal and bamboo fiber to improve the fabrics handle and reduce the piling.The effect increases significantly with extension of time. Dosage:Exhaust:0.5.-2.0%（o.w.f） |
|
Peroxide killer enzyme 208 Nonionic liq PH:5-7 |
Suitable for removing residual peroxide in facilities |
Able to withstand pH 6-9 and used for removing peroxide after bleaching process, can be used in one vat during dyeing. Dosage:Exhaust:0.1-0.2g/L |
|
2-in-1 enzymatic COMBI Nonionic liq PH:5-7 |
Suitable for cotton hemp and its blend in removing peroxide and polishing in a single process |
Used for cotton, hemp viscose alike to remove peroxide and polishing in a single process and reduce time to improve efficiency. Dosage:Exhaust:0.3-2.0g/L |
|
Scouring Enzyme RP Nonionic liq PH:5-7 |
Suitable for cotton,hemp blend in low temperature with biological method |
Use for cotton, hemp viscose alike able to function at 60 Suitable for deep colors in neutral condition to make fabrics low loss weight ratio and soft handle. Dosage: Exhaust:1.0-2.0g/L |
| Product | Application | Characteristic |
|
Stabilizer NSP Anionic liq PH:4-5 |
Suitable for cotton and hemp blend in bleaching. |
Use for peroxide control to protect process and fabrics strength without Phosphorus and phosphorous salts. Dosage:Exhaust:Peroxide at 10-20%； Padding:Peroxide at 40-50% |
|
Stabilizer 207 Anionic liq PH:4-5 |
Suitable for cotton and hemp blend in bleaching. |
Functioning as a stabilizer and free from silicates does not cause machine corrosion or blockage. Dosage:Exhaust:1peroxide at 10 -20%； Padding:Peroxide at 40-50% |
|
Stabilizer NC Non-ionic liq PH:10.5-11.5 |
Suitable for cotton and hemp blend in bleaching. |
Modified silicate stabilizer excellent sequestering and prevent fabrics damage. Dosage:Exhaust:Peroxide at 10 -20%； Padding:Peroxide at 40-50% |
| Product | Application | Characteristic |
|
Sequestering 216 Anionic liq PH:4-5 |
Improve water quality in all fabrics process |
Improve water quality with strong dispersing and complexing function in pre-treatment dyeing and soaping process. Dosage:Exhaust:0.5-1.0g/L； Padding:1.0-3.0g/L |
|
SequesteringNP Anionic liquid PH:4-5 |
Improve water quality in all fabrics process |
Improve water quality with strong dispersing and complexing function in pre-treatment dyeing and soaping process without Phosphorus. Dosage:Exhaust:0.5-1.0g/L； Padding:1.0-3.0g/L |
|
Sequestering powder ST Anionic Powder PH:7.0-8.0 |
Improve water quality in all fabrics process |
Use in pretreatment,bleaching,dyeing and printing to improve water quality. Can effectively withstand alkali and remove rust. Dosage:Batch:0.3-1.0g/L; Continous:2.0-3.0g/L |
| Product | Application | Characteristic |
|
Scouring-bleaching AP Non-ionic Powder PH:10.5-11.5 |
Suitable for cotton and hemp blend in single step scouring-bleaching process |
Without addition of alkali and peroxide, function as scouring-bleaching process. Excellent sequestering, stabilizer and scouring in one single product. Dosage: Exhuast:3.0-6.0%（o.w.f）; Padding:10-20g/L |
|
Multi-functional scouring AP-D Non-ionic Powder PH:10.5-11.5 |
Suitable for cotton and hemp blend in single step scouring-bleaching process |
Alkali substitute with a single addition of peroxide to complete the scouring bleaching process. Dosage:Exhaust :2.0-3.0%（o.w.f） |
|
Hemp Scouring CH Non-ionic Powder PH:6-7 |
Suitable for hemp and its blend to optimize the pretreatment |
Especially for hemp and its blend to increase whiteness. Dosage: Exhaust:2.0-3.0%（o.w.f） |
|
Hemp cotton scouring AP-40 Non-ionic Powder PH:11.5-12.5 |
Suitable for hemp and its blend to optimize the pretreatment |
Excellent scouring and bleaching with stability and dispersibility to protect yarn strength. Dosage: Exhaust:2.0-3.0%（o.w.f） |
| Product | Application | Characteristic |
|
Wetting agent M Non-ionic liq PH:7-8 |
Suitable for wetting in all process |
Fast acting wetting agent, compatible for use with other auxiliaries. Dosage:Exhaust:0.5-1.0%; Padding:5.0-10g/L |
|
De-foaming wetting NF Non-ionic liq PH:7-8 |
Suitable for wetting in all process |
Able to de-foam with quick wetting function, suitable for yarn processing and improve wetting and effective. Dosage:Exhaust:0.5.-1.0%（o.w.f） Padding:5.0-10g/L |
|
Alkali wetting 205 Anionic liq PH:7-8 |
Suitable for cotton and hemp blend in wetting process |
Able to function at alkali level of 180g/ L with quick acting wetting function. Dosage:Padding:5.0-10g/L |
|
Mercer wetting agent MC Anionic liq PH:7-8 |
Suitable for cotton and hemp blend in mercerizing and wetting process |
Suitable for cotton in mercerizing process, at an alkali solution of 250g/ L with fast acting wetting function. Dosage: Padding:5.0-10g/L |
| Product | Application | Characteristic |
|
Remover Powder T Non-ionic Powder PH-11.5-12.5 |
Suitable for PE and nylon blend |
One dosage multi-functional agent with function of oil removing, stain removing, mould removing, desizing, and scouring, can used to clean dyeing equipment as well . Excellent decontamination and emulsifying. Dosage:Exhaust:1.0-4.0g/L; padding:2.0-6.0g/L |
|
Remover Powder T100 Non-ionic Powder PH:8.0-9.0 |
Suitable for PE and blend |
Suitable for PE and blend in process of low alkali oil removing or single step scouring-dyeing oil removing. Excellent oil removing, detergent washing with less influence on shade. Dosage:single step scouring-dyeing:1.0-4.0g/ L. |
|
Remover Powder Non-ionic Powder PH：9.0-10.0 |
Suitable for PE and blend |
Suitable for PE and blend in process of low alkali oil removing or single step scouring-dyeing oil removing. Excellent oil,stain, mould, rust removing, and detergent washing with less influence on shade. Dosage:Single step scouring-dyeing:1.0-4.0g/ L |
|
High Conc Oil remover 306 Anionic liq PH：7-8 |
Suitable for PE and nylon blend |
Able to emulsify, disperse and oil remove while preventing anti back-stain of sizing or oil agent. Dosage:batch：0.3.0-1.5g/ L； Continuous:1.0-3.0g/ L |
|
Oil Remover OP Non-ionic liq PH:7-8 |
Suitable for PE and nylon blend |
Suitable for use with poly ester, nylon and spandex in pretreatment or single step scouring-dyeing. Able to prevent anti-back stain of oil remover,oil spot and color defect. Dosage:batcht:0.3.0-1.5g/ L Continuous:1.0-3.0g/ L |
|
Oil Remover LDA Non-ionic liq PH：7-8 |
Suitable for PE and nylon blend |
Use for PE and its blend in pretreatment or single step scouring-dyeing with excellent dispersant and prevent oil spotting，color defect. Dosage:0.3.0-2.0g/ L |
|
Oil Remover TOP Non-ionic liq PH：7-8 |
Suitable for PE and nylon blend |
Soulvant for old oil filament and heavy oil stain. Dosage:Exhaust:1-5g/ L |
| Product | Application | Characteristic |
|
High conc scouring- wetting1204 Anionic liq PH:7-8 |
Suitable for cotton ,rayon,and hemp blend in batch pretreatment |
Excellent scouring, wetting, oil removing with low foaming and environmentally friendly. Can also be used as detergent to clean stain. Free of APEO. Dosage:Exhaust:0.2-0.5%（o.w.f） |
|
Low temperature scouring AP-L Anionic liq PH:7-8 |
Suitable for cotton,rayon,and hemp blend in batch pretreatment |
The effective active agent provide emulsify and wet . Able to work at a temperature of 75-85℃ to react and synergize with peroxide, attaining high capillary effect and whiteness. Dosage:Exhaust:1.0-2.0%（o.w.f） |
|
Fast scouring EFT Anionic liq PH:7-8 |
Suitable for cotton,rayon,and hemp blend in batch pretreatment |
EFT adopt advanced active agent technology,which is more than twice the properties of ordinary scouring. Able to function under a low alkali solution and reduce the process and time. Dosage:Exhaust:0.5-1.0%（o.w.f） |
|
Low temperature scouring Dyeing SD Non-ionic liq PH:7-8 |
Suitable for cotton,rayon,and hemp blend in batch pretreatment |
For use with deep colors at temperature of 60℃ with single step scouring-dyeing Reduce the number of neutralization and washing as its in neutral condition. Dosage:Exhaust:1.0-2.0%（o.w.f） |
|
Wax dispersion NS Non-ionic liq PH:7-8 |
Suitable for cotton,rayon,and hemp blend in batch and continuous pretreatment |
Able to emulsify and disperse wax on sizing and prevent anti-staining. Dosage:Exhaus:0.5-1.0/L; Padding:2.0-5.0g/L |
|
Alkali resistance scouring 88 Anionic/Non-ionic liq PH:7-8 |
Suitable for cotton,rayon,and hemp blend in batch and continuous pretreatment |
Able to function under a high alkali solution, with quick acting wetting function. Can improve capillary effect and withstand alkali solution at 180g/ L. Dosage:Exhaust:0.5-1.0g/L; Padding:5.0-10g/L |
|
Desizing-scouring CP-LSP Zwitterionic liq PH:7-8 |
Suitable for cotton,rayon,and hemp blend in batch and continuous pretreatment |
Targeting the sizing coating on the fabrics and acts a stabilizer while performing scouring function, especially effective in cold pad process. Dosage:Exhaust:0.5-1.0g/L; Padding:5.0-10g/L |
|
Three-in-one scouring CPB Anionic/Non-ionic liq PH:7-8 |
Suitable for cotton,rayon,and hemp blend in batch and continuous pretreatment |
Acts as a stabilizer, emulsifying scouring, sequesteringc. Dosage:Exhaust:0.5-1.0g/L； Padding:10-20g/L |
| Product | Application | Characteristic |
|
Multi-functional Desizing LS Non-ionic Powder PH:10.5-11.5 |
Suitable for cotton and hemp blend |
Suitable for cotton and its blend effectively desize the fabrics。 Excellent dispersing for PVA while preventing anti back-stain of sizing agent. Dosage:Exhaust:0.5-3.0g/L； Padding:2.0-5.0g/L |
|
Desizing powder DT Anionic/non-ionic Powder PH:10.5-11.5 |
Suitable for PE and nylon blend |
High dense and size content overflow desizing process can be applied in effectively desize and reduce oil spotting while preventing anti back-stain of sizing agent. Dosage:Overflow:1.0-2.0g/L； Jigger 2.0-3.0g/L |
|
Desizing DTF Anionic/non-ionic liq PH:7-8 |
Suitable for PE and nylon blend |
For use with PE and synthetic blend in jigger or continuous process. Synergize with the addition of alkali to emulsify and remove the sizing agent. Dosage:Jigger:1.0-2.0g/L； Padding:1.0-3.0g/L |
Tel:+86-021-36160960Fax:86-021-36161209
Email：selina@cqhaifa.comAdd：Room 211,No.12,Lane 555,Chengyin Road,Urban Industrial Park,Baoshan District,Shanghai
Copyright @ 2020 Shanghai yuanna finechemicalco.,ltd All Rights Reserved Web design 沪ICP备19013687号
